Resolve® Heavy Traffic Foam Carpet Cleaner
Daily messes

Resolve® Heavy Traffic Foam Carpet Cleaner

Resolve® Heavy Traffic Foam Carpet Cleaner delivers high powered foaming action that lifts tough messes away. It enhances your vacuuming routine with 5X benefits vs. vacuuming alone:

1. Neutralizes odors

2. Deep cleans

3. Removes 3x more dirt

4. Freshens

5. Newer looking carpets.

This is a perfect solution to deep clean wide areas easily, plus it helps prevent resoiling. Try it with Resolve® Easy Clean Brushing Kit and you will get the job done in no time. Safe to use on wool, nylon, and stain-resistant carpet.

More retailers

Product feature

Removes 3X more dirt vs. vacuuming alone

Deep cleans wide areas easily


Leaves carpet clean, fresh & soft ​

Safe to use on wool, nylon, and stain-resistant carpets​

How to use

BEFORE CLEANING: Vacuum carpet thoroughly to remove loose dirt. Test a small, hidden area for colorfastness and examine when dry. If color is affected, do not use. For upholstery, look for manufacturer’s cleanability code tag. Use on fabrics coded “WS” or “W”. If coded “X” or “S”, do not use. Not recommended for use on velvet, silk, vinyl, or leather. DO NOT use RESOLVE® EASY CLEAN BRUSHING KIT on any surface other than carpets. DO NOT spray directly on pets. Use only in well-ventilated areas. Keep children and pets off carpet until dry.




1. SHAKE CAN WELL. Hold can upside down about 2 feet above carpet. Spray foam evenly over a 3-foot square area.

2. Work the foam into carpet in two directions using a damp, colorfast mop.

3. Repeat steps 1&2 until the entire area is cleaned.

4. When dry, vacuum thoroughly to remove dried foam and loosened dirt.



1. Remove spray cap from RESOLVE® HEAVY TRAFFIC FOAM 22oz can. SHAKE THE CAN VIGOROUSLY BEFORE EACH USE. If the can is already in the gadget, remove and shake again.

2. Insert can into the gadget and rotate clockwise until it gently clicks into the locked position.

3. To remove the can, rotate counter-clockwise into the unlocked position and gently pull upwards.

4. Pull trigger to dispense foam, then brush the foam into the carpet. When dry, vacuum thoroughly to remove dried foam and loosened dirt.

5. Replace spray can cap to can for standard use.



1. Blot wet soils with a clean absorbent cloth.

2. SHAKE CAN WELL and generously apply directly to stain from a distance of 4-6 inches. Allow foam to absorb into stain for 3 minutes.

3. Gently blot area with a clean, damp, colorfast sponge or cloth. Rub gently if required. DO NOT OVERWET FABRICS. Hint: To avoid rings, clean entire section where soil occurs.

4. Rinse sponge or cloth and repeat as necessary. Allow fabric to dry thoroughly before use.

5. ONLY use spray cap to dispense foam for upholstery cleaning.